Using a Password
You can use a password to keep the information in
the databank private. The password is requested
when the unit is turned on and the databank is
accessed.
Password Warnings
Warning! After you set the password, you must enter
the password to access the databank for the first time
during a session. Always record your password and
keep it in a separate place.
If you forget the password, you must reset the unit to
access the databank. Warning! Resetting the unit
erases all user-entered information. Always keep writ-
ten copies of your data.
If you do not have a reset button located on the back
of your unit, remove the batteries, wait at least two
minutes, and then re-install them. For battery instruc-
tions, see “Replacing the Battery”.
If you have a reset button, use the end of a straight-
ened paper clip to gently press the reset button.
If the unit does not reset after pressing the reset but-
ton, follow the above instructions for removing the bat-
teries.
