Always write the password in a safe, separate location. If you lose or forget the pass-
word, you will be able to use the Databank again only by removing the batteries from
your BOOKMAN, which will permanently erase all the information stored in the Databank.
1. Press .
2. Touch DATA.
3. Highlight Set password and then press ENTER.
4. Type a password of up to eight characters and press ENTER.
Use
to move the cursor; use BACK to delete.
5. Press C to confirm or CLEAR to cancel the password.
The password you set will be requested the first time that the Databank is used
during a session.
6. To change the password, repeat Steps 1-5.
To remove a password, press ENTER at the blank password screen.
7. Press MENU to go to the dictionary.
