5
NOTE
STEP 7
Slide the Top Pole (F) through the Middle Pole (E) until it comes out from the top of the middle pole. Make sure there are two
holes on each side of the top pole protruding from the middle pole for backboard assembly.
Insert the Top Pole (F) up inside the Middle Pole (E). Insert the square Bolt M8x65mm (5) and lock it with the Triangle Nut (N).
NOTE:
1. Pole (F) comes packaged inside pole (E). Do not separate. Only need to slide pole (F) up through pole (E).
2. The square bolt M8x65mm (5) has a position fix point at the top of bolt. It helps secure the pole. Make sure this is well inserted
into the pole.
3. Check the warning label on the middle pole (E), and make sure it faces user/front and the triangle nut (N) is at the back.
4. The remaining holes in the Top Pole (F) are for height adjusting, including : 5.5ft (1.69m), 5.9ft (1.79m) and 6.4ft (1.95m).
PARTS
E
x1
F
x1
ITEM#:
For replacement parts:
Visit: www.franklinsports.com/91017X
Email: [email protected]
Call: 1-800-225-8649
N
x1
5
x1
91017X 91017C1X
