L Shaped Bent Tube 4pcs
Straight Double
2pcs
Flanged Tube
Folding Corner Piece, Left 1pcs
Folding Corner Piece, Right 1pcs
Straight
Double 4pc
Long
Straight
Double
2pc
Flanged Tube
Ground
Stakes 6pcs
Pin
2pcs
Screw
(Pre-assembled) 2pcs
Bolt
(Pre-assembled)
2pcs
Net
1pc
Self-Stick Straps
40pcs
FRAME COMPONENTS
1
2
5
4
3
6
7
8
9
10
Assembly Instructions
1. Assemble top front cross bar and back base bar by inserting tube marked
into the tube . Then insert tube into tube . Lastly insert tube
into another tube marked . Do this once for the back base and again
for the front cross bar.
2. Insert the remaining 2 pieces of tube into the bent ends of tube on
each side of the back base.
3. Connect the folding joint part to the end of tube and attach folding
joint to the other part on the side base.
4. Insert tube into tubes and on both ends of the structure.
5. Attach the top front crossbar (assembled in step 1) to the upward pointing
tubes marked .
6. To fold goal (refer to figure 1B) remove the lock pin on both sides before
folding top backwards. Once folded, insdert lock pins to secure.
11
12
FRAME ASSEMBLY
Assemble all lengths of tubing as shown in Figure 1. Be sure that
each piece is inserted completely. The end of each tube inserts
tightly and is secured when the press button of the tapered end
pops through the adjoining perforated tube. (Refer to Figure 1A)
5
Figure 1A
Figure 1B
2
4
3
6
3
Figure 1
4
5
6
6
5
5
2
5
5
1
5
5
5
6
1
1
3
8
8
