Franklin Wireless R526, Quick Start Manual

Page: 8 / 21

4
2.1 Charging the battery
1. The battery compartment is located on the
bottom of the device.
Slide open the battery compartment door
by firmly pressing in the direction of the arrows.
2. Insert the battery by lining up the gold
contact points on the battery with the gold
contact points in the battery compartment.
Then press down gently until the battery
is seated.
3. Replace the battery cover and slide it closed
while pressing gently until it locks into place.
4. Connect the micro USB end of the AC-DC
adaptor to the micro USB port of the device.
Note
•
You must have a fully charged battery the first
time you use the R526.
•
After the first use, you may use the device while
it is connected to the AC-DC adaptor.
•
When using battery power, the device lasts up to
3 hours (when connected to a single device only).
•
The battery will discharge more rapidly as
additional devices access the R526.