Franklin Wireless R526, Quick Start Manual

Page: 12 / 21

7
3.1 Connecting the R526
When you press the power button:
•
The R526 comes on and the power LED lights up.
•
A solid green power LED of indicates that
the device is charged over 40%.
1. Turn on the R526 ensure your WiFi is enabled
on your PC or laptop. You can view your available
wireless networks by going through the control
panel, network connections or system tray
(lower right hand corner of your screen).
2. Select “
Cellcom XXXX
” as your wireless network
and enter the default network key to connect.
The network key is labeled as “
Password ” on the
sticker on the back of the device.
Note.
1. The last 4 digits, ‘
XXXX ’ of the SSID is the last four digits
of your MAC address. You can find the MAC address of
your R526 on the label under the battery.
2. If the device’s sticker has been lost or removed, the default
network password can also be determined by looking under
the battery for the device’s MAC address. The network key
should look like: 0024FC020000 (Please note that unlike the
MAC address the network does NOT include any colon marks
and is uppercase.).
3.2 Opening the Browser Interface
1. Open your Web browser and enter
http://192.168.0.1
into the address window.
2. Click Login button on the right top of the
browser. The below pop up message will
open to require administrative ID & Password.
The default ID and Password is admin/admin.
Type the administrative ID and password
into the Login box and click ok.
3. Click Connect
4. Open your computer web browser and enter
http://192.168.0.1
into the address window
and press the Enter key.