FRÄNKISCHE | IM MM SediPoint
16
5. Cleaning
Empty the cleaning shaft by removing
water and sediment.
To do so, direct the wastewater pump or
suction hose through the maintenance
channel of the sediment collector all the
way down to the bottom of the mud
chamber below the sediment collector.
See page 15
Flush the sediment collector using a
high-pressure cleaner and at the same
time drain the flushing water.
To do so, clean the depots and flow
separators through the cleaning shaft
of the sediment collector.
1
Insert the operating pipe.
2
Close the bayonet nut connector by turning it clockwise.
The bayonet nut connector is closed if the handles point
towards inlet and outlet.
3
Refill the shaft.
4
Insert the dirt trap.
5
Close the cover.
n
Completing cleaning work
Vacuuming with a
pump or a cleaning
/vacuum truck
High-pressure
cleaning
and vacuuming
2
3
Removing the
operating pipe
1
Removing
the operating
pipe
Removing
the cover
