FRANKIA OPERATING MANUAL
104
FRANKIA OPERATING MANUAL
105
9.8 Electric drop-down bed (Coachbuilt except PLUS) -
Drop-down bed faulty:
Bed
in
the
lower
position:
•
Turn off the main 12 V switch on the control panel
above the entrance door.
•
Remove the drop-down bed curtain.
•
Loosen the two fastening screws A and B (size 17
spanner) of the lifting cylinder and unhook them.
•
Gently swing the bed up.
•
Quickly find an authorised FRANKIA dealer for trou-
bleshooting
Bed
in
the
upper
position:
•
Turn off the main 12 V switch on the control panel
above the entrance door.
•
Sit on the dashboard.
•
Loosen the screws above your head on both sides
(Pos. A) and lower the bed slowly.
•
Quickly find an authorised FRANKIA dealer for trou-
bleshooting.
Electric drop-down bed (Coachbuilt PLUS) - Drop-down bed faulty:
•
Bed in lower position, headboard section extended
•
Turn off the main 12 V switch on the control panel
above the entrance door.
•
Remove the mattresses.
•
Cut a slit in the spacer fabric over the two mainte-
nance holes to access the headboard linear drive
mounting screws.
•
Loosen the two fastening screws and take them out.
•
Pull in the headboard until it stops.
•
You can use the two access points below the light
canopy on the underside of the bed to drive the
motor shafts of the seat belt retractors using the
Allen key (emergency operating crank located in
the rear storage compartment), alternately at the
front and rear, or simultaneously using a second
crank.
•
Quickly find an authorised FRANKIA dealer for trou-
bleshooting.
Bed in the upper position:
•
Turn off the main 12 V switch on the control panel above the entrance door.
•
Turn the bed downwards as described above using the two crank access points.
•
As described previously, unhook the headboard linear drives and pull out the head part.
•
Quickly find an authorised FRANKIA dealer for troubleshooting.
9.9 Vehicle
Straight line driving unsatisfactory, difficult to steer:
•
Check tyre pressure
•
Check whether the front axle is overloaded
