Important note:
Set up the screen on a
horizontal floor (for reason of stability).
When used in assembly rooms
, the
tripod screen has to be secured from
toppling over
;
if necessary by anchoring it
in solid brickwork.
Turn screen case (4) to horizontal position.
Press the blocking (5) head lever, simultaneously pull the inner tube (3) up by
about 10 cm.
Roll out the projection screen from
tubus
(6)
and hook it on the hook (7)
or pull-out hook (7a).
Press locking piece (5) and shift the
inner tube (3) up to the required height
in the same time.
A
5
3
4
C
7
6
7a
E
4
D
(A)
Push in
B
GB
Screw the wheels into the
circular stand.
8
9
F
G
A
B
Adjust for height using the slide grip (8)
pressing the button (9) at the same time.
Turn tensioner (10) at end of screen case
anti-clockwise to tension screen of
required. An half turn should
be sufficient.
Important note:
Make sure that the screen stands stably on an
even floor and that the screen surface is securely hooked onto
the upper hook or keystone eliminator. Pay attention that it cannot
be knocked over. Crowded rooms, animals and playing children
are potential sources of danger.
After use:
Please observe the aforementioned safety hints as
well when taking down the screen after use.
(Fig.
C
) Press the blocking head lever (5), slide down inner tube (3).
(Fig.
E
) Unhook screen from case hook (7) and let it roll into.
(Fig.C
+D
) Swivel screen case. Insert hook (7) into tube cap.
Tighten the screw (A) and lock
the wheels (B) in order to
prevent the screen from
turning.
5
4
All manuals and user guides at all-guides.com
