Franke MARIS FMA 839 HI, Manual, Page: 8 / 196

EN
FMA 839 HI / FMA 839 HI LL KIT
– 8 –
adhesives may result in
warping and detachment.
Z
The kitchen unit must have
sufficient space to allow
for electrical connection of
the device. Wall-mounted
units above the device must
be installed at a sufficient
distance to leave the space
required to work in comfort.
Z
The use of decorative
hardwood borders around
the worktop behind the
device is allowed, provided
the minimum distance
always complies with the
indications provided in the
installation drawings.
Z
The minimum distance
between the fitted device
and the rear wall is indicated
in the installation drawing for
the flush-fitted device (150
mm for the side wall, 40 mm
for the rear wall and 500
mm for any wall-mounted
units above it).
Z
To avoid any infiltration of
liquids between the hob
frame and the worktop,
position the adhesive seal
provided along the whole
outer edge of the hob before
installation.
Proper use
Z
The suction hood has been
designed solely to eliminate
cooking fumes during
domestic use.
Z
Never use the appliance
for purposes other than
those for which it has been
designed.
Z
Deep-fryers must be kept
under constant supervision
when in use: the oil may
catch fire if it gets too hot.
Z
Do not use the device with
an external timer or separate
remote controlled system.
Z
The device must never be
installed behind a decorative
door, to prevent it from
overheating.
Z
Never climb onto the device,
as this may damage it.
Z
Never place hot pots and
pans on the frame, as this
may damage the silicon seal.
Z
Never cut or prepare food
on the vitreous ceramic