2
036865-004
0112
3
0112
036865-004
MODULAR SPORTS BOTTLE FILLER
InSTRUcTIOnS FOR MODELS: KEMWSBF, KEMW8SBF, KEMW12SBF,
KEM8SBF, KEM12SBF
MODULAR SPORTS BOTTLE FILLER
InSTRUcTIOnS FOR MODELS: KEMWSBF, KEMW8SBF, KEMW12SBF,
KEM8SBF, KEM12SBF
5. TO DIScOnTInUE USE OF SySTEMS WITh chILLER
Drain cooler when removed from service: (1) Remove grille, (2) Close supply valve, (3) Provide container to catch water, and remove drain plug.
6. MAInTEnAncE (SySTEMS WITh chILLER)
The only maintenance required is the removal of dirt and lint from the condenser. Inspection should be made at 3 month intervals. Remove the grille
and clean the condenser with a vacuum attachment.
The warranty and the Underwriters’ Laboratory listing for this machine are automatically voided if this machine is altered, modified,
or combined with any other machine or device. Alteration or modification of this machine may cause serious flooding and/or hazardous electrical
shock or fire. EXCEPT AS SET FORTH HEREIN, THE MANUFACTURER MAKES NO OTHER WARRANTY, GUARANTEE OR AGREEMENT EXPRESSED,
IMPLIED OR STATUTORY, INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
WARnInG
19 [483]
WALL OPENING
19 3/4
[502]
9 7/8
[251]
40 [1016]
WALL
OPENING
40 3/4
[1035]
28 3/8
[721]
3 15/16 [100]
5 5/16
[136]
WATER OUTLET
AND INLET
6 7/16 [164]
JUNCTION BOX
5/16 [8] DIA. MOUNTING
HOLES 8 EACH SIDE,
4 TOP AND 4 BOTTOM
1 13/16 [46]
1/2 [13]
11 5/16 [287]
WALL OPENING
8 1/8 [206]
2 [52]
1 1/2 OR 1 1/4
IPS WASTE
STUB OUT
1/4 OD TUBE
COOLING UNIT
WATER INLET
1 1/4 TAILPIECE
1 3/8 [35]
ELECTRICAL
CONNECTION
COOLING UNIT
FRAME ASSY
FURNISHED
FINISHED WALL
FLOOR LINE
3 1/2 [89]
4 5/16 [110]
21 9/16
[548]
21 3/8
[644]
26 5/8
[677]
ROUGHING-IN
AND
DIMENSIONAL DRAWING
THIRD ANGLE PROJECTION
NOTES:
1. RECOMMENDED ADULT HEIGHT INSTALLATION SHOWN.
ADJUST VERTICAL DIMENSIONS AS REQUIRED TO COMPLY
WITH FEDERAL, STATE AND LOCAL CODES.
2. STOP VALVE, TRAP, PIPE CONNECTOR TO WASTE
WASTE LINE NOT PROVIDED. SHORT RADIUS TRAP REQUIRED.
3. ALL DIMENSIONS ARE IN INCHES.
DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS.
MODULAR SPORTS BOTTLE FILLER - MODELS KEMWSBF, KEMW8SBF, KEMW12SBF
39 1/2
[1003]
38 3/4 [984]
WALL OPENING
19 3/4
[502]
9 7/8
[251]
REMOVE NUT AND BUTTON
FOR FLOW REGULATOR
ACCESS
3/8 O.D. WATER INLET
1 1/2 OR 1 1/4 IPS WASTE
STUB OUT 2[51]
3 [80]
TO ORIFICE
WATER OUTLET
AND INLET
5/16 [8] DIA. MOUNTING
HOLES 8 EACH SIDE,
8 TOP AND 8 BOTTOM
1 13/16 [46]
1/2 [13]
14 [356]
5 5/16 [136]
28 3/4
[730]
TO FTN
34 9/16
[878]
ORIFICE
27
[686]
FLOOR LINE
6 7/16 [164]
JUNCTION
BOX
COOLING
UNIT
1 1/4 OD TAILPIECE
1 3/8 [35] ELECTRICAL
CONNECTION
FINISHED WALL
16
[406]
18 1/2
[470]
1 1/2 OR 1 1/4
IPS WASTE
STUB OUT
6 1/2 [165]
10
1
3/
16
[2
74
]
40 3/4
[1035]
3 15/16 [100]
1 1/4 TAILPIECE
19 3/4
[502]
28 3/8
[721]
26 5/8
[677]
25 3/8
[644]
3 1/2 [89] FRAME
ALLOW ADDITIONAL
DEPTH FOR WATER
AND WASTE LINES
4 5/16 [110]
21 9/16
[548]
40
[1016]
WALL
OPENING
2 [52]
8 1/8
[206]
11 5/16 [287]
WALL OPENING
1/4 O.D TUBE
COOLING UNIT
WATER INLET
NOTES:
1. RECOMMENDED ADULT HEIGHT INSTALLATION SHOWN. ADJUST VERTICAL DIMENSIONS AS
REQUIRED TO COMPLY WITH FEDERAL, STATE AND LOCAL CODES.
2. STOP VALVE, TRAP, PIPE CONNECTOR TO WASTE, WASTE LINE NOT PROVIDED. SHORT RADIUS
TRAP REQUIRED.
3. ALL DIMENSIONS ARE IN INCHES. DIMENSIONS IN BRACKETS [ ] ARE IN MILLIMETERS.
THIRD ANGLE PROJECTION
ROUGHING-IN
AND
DIMENSIONAL DRAWING
MODULAR SPORTS BOTTLE FILLER - MODELS KEM8SBF, KEM12SBF
