•
In a sink drain pipe branch.
This branch
must be above the trap so that the bend is
at least 60 cm above the ground.
•
Directly into a drain pipe
at a height of
not less than 60 cm and not more than 90
cm. The end of the drain hose must always
be ventilated, i.e. the inside diameter of the
drain pipe must be larger than the outside
diameter of the drain hose. The drain hose
must not be kinked.
The drain hose may be extended to a maximum of 4 metres. An additional drain hose and
joining piece is available from your local Service Centre.
Building in
This appliance has been designed to be built
into the kitchen furniture. The recess should
have the dimensions shown in picture A.
A
Preparation and assembly of the door
The machine is originally prearranged for the
assembly of a door opening from right to left.
In this case it is sufficient to screw inthe hing-
es (1) and the counter-magnet (6) provided
with the appliance, at the right level (Fig. B).
B
1
2
3
7
6
5
4
a) Door
The dimensions of the door should be:
- width 595-598 mm
- thickness 16-22 mm
The height (C-Fig. C) depends on the height
of the adjacent furniture's base.
27
