9
CUT OUT SIZES
INSTALLATION INSTRUCTIONS
The installation comes under the exclusive responsibility of service. The installer must respect the legislation and the standards enforce in his
home country.
How to stick the gasket
The gasket supplied with the cooktop avoids all infiltration of liquids in the cabinet. Installation has to be done carefully, in conformity of the
following drawing.
•
The bench top or the support in which the cooktop is to be fitted, as well as the edges of the furniture, the laminates coatings and the glue
used to fix them, must be able to resist temperatures of up to 100°C.
•
Do not install the cooktop to the top of a non ventilated oven or dishwasher.
•
The underside of the cooktop requires a clearance of 20mm from the under side of the induction unit to ensure good air circulation of the
electronic device.
•
If a drawer is placed under the unit, do not put flammable objects (for examples sprays) or non heat resistant objects inside.
•
The over head clearance should be 750mm unless the over head surface is non combustible or the range hood is rated for lower clearance
taking into account the installation requirements of AS/NZ 5601
where applicable.
•
Where the appliance is supplied to be plugged into a GPO the plug must not be removed.
•
Where the appliance is supplied with two power leads the GPO’s must be rated to suit the plug or greater.
Stick the gasket (2) two millimeters from the
external edge of the glass, after removing
the protection sheet (3).
889mm
1003mm
895mm
381mm
376mm
450mm
68mm
900mm
945mm
906mm
454mm
448.5mm
540mm
65mm
FLG1003B1 N/L
FLG945B1 N/L
