background image

 

 

 

 

 

EN 

1

10 

MAINTENANCE

 

REMOTE CONTROL (OPTIONAL) 

The appliance can be controlled using a remote control powered 
by a 1.5 V carbon-zinc alkaline batteries of the standard LR03-
AAA type (not included). 
•  Do not place the remote control near to heat sources. 
•  Used batteries must be disposed of in the proper manner. 

 

Grease filters 

These can be washed in the dishwasher, and need to be cleaned 
whenever the 

Drip

 symbol appears on the display or at least once 

every 2 months use, or more frequently if use is particularly 
intensive. 

Resetting the alarm signal 

• Press button 

G

 and hold it for at least 2 seconds. 

Cleaning the Filters 

•  Remove the grid by pulling it from the side. 
•  Disconnect the electrical connections to the Spotlights. 
•  Remove the wire filter supports. 
•  Remove and wash the Filters, leave to dry before replacing. (If 

the surface of the filter changes colour as time goes by, this 
will have absolutely no effect on the efficiency of the filter 
itself.) 

• Replace them on the filter holder grid, using the wire filter 

supports to fix them in place.  

•  Connect up the electrical connections to the Spotlights again. 
• Replace the grid. 

 

Summary of Contents for FHO 508 BK













Reviews: