21
hotplate and the display indicates letter “A”.
• Select desired power level. Power indicator intermittently displays the “A”
symbol and the selected power setting. When the fast heating period expires,
hotplate switches to the pre-selected power setting, displayed
constantly on the indicator.
Hint
• If the power selection knob remains at level 0 three seconds after the automatic
fast heating is activated, that is if you fail to select the power setting for regular
cooking, the fast heating function is switched off.
• If you remove the dish from the hotplate and then within the next 5 seconds
return it on the hotplate, the fast heating function will resume operating fully to
the end.
Power
setting 1 2 3 4 5 6 7 8 9
Maximum
power
cooking time
(min.)
0,8 2,4 3,8 5,2 6,8 2,0 2,8 3,6 0,2
If you activated the automatic fast heating function and also switched on
extra powerful heating, the latter will prevail over the automatic setting.
Safety switch off
Power
setting
1 2 3 4 5 6 7 8 9
Hours lapse prior safety
switch off
6 6 5 5 4 1.5 1.5 1.5 1.5
Maximum continuous operation of a particular hotplate is limited, and the
duration is displayed in the above chart. When the hotplate is switched off by the
safety mechanism, the indicator displays symbols “0”, or “H” in case there is any
remaining heat left.
In such cases switch the hotplate off by touching the relevant power setting
sensor (C).
Example:
Set the hotplate to power level 5 and leave it operate for some time. If you do not
change the above setting, the safety mechanism will switch the hotplate off after
4 hour.
Protection from overheating
Induction hotplate is also fitted with safety device against overheating which
protects electronic parts from damages. This device operates on several levels.
When temperature of the hotplate excessively rises, it switches on two-stage fan.
If this is not enough, extra powerful heating is deactivated, and finally the safety
device either reduces the heating power of certain hotplates or turns them off
completely. When the hotplate cools
off, the full power of hotplate is again available.
Timer
Timer facilitates the cooking procedure by setting the period of hotplate
operation, and it can also be used as alarm timer.
Activating the timer
• Touch the hotplate ON/OFF sensor (C) of the relevant hotplate. Decimal dot
(B1) is on.
• By touching the »+» or »-« (C or E) sensor select the power setting from 1 to 9.
• Touch the timer ON/OFF sensor (G) to activate timer. Timer display (H)
indicates »00«.
• By touching sensors »+» or »-« (G or E) set the desired cooking time (from 01
to 99 minutes). After a few seconds timer starts operating. Timer controlled
hotplate control lamp (H1) is on.
You can use timer to set exact cooking time for each hotplate at the same
time. To speed up the timer setting keep the relevant sensors »+» or »-« (G
or E) constantly pressed.
Summary of Contents for FHBP 604 4I PW T XS
Page 29: ...29 ...
Page 30: ...30 LIB30384 ...