Franke FFC 1005 XS, Instructions For Use And Installation, Page: 9 / 60

EN
9
9
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch hav-
ing a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) being
sure that the connector of the feeding cable is correctly inserted
in the socket placed on the side of the fan.
Chimney mounting
• Remove the chimney parts out of the packing leaving them one
inside the other.
• Extend slightly the two side parts of the chimney and place the
upper chimney on the chimney support 7.4 .
• Fix the upper chimney with two screws 12c (2,9 x 9,5) sup-
plied
• Move the lower chimney downwards until the two side lips of
the chimney are completely inside their seats in the hood body.
• Remove the grease filters.
• Fix the chimney onto the hood body with two screws
12c (2,9
x 9,5) supplied, tighting them from inside the hood.
• Replace the grease filters.
12c
12c