Franke F7E07S1, Installation, Maintenance And Use Instructions

Page: 18 / 35

18
STEEL RACKS Slide the racks onto the runners on both sides of the oven. The racks have non-tip
safety notches, which prevent them from being pulled out completely while the oven
is in use.
When inserting a rack, always check that the safety notches are at the back. To
remove racks, raise them upwards and pull out.
TELESCOPIC RACKS The oven is also equipped with full-extension telescopic racks that extend on ball
bearing glides.
The telescopic racks must be securely fastened to the side runners.
Additional racks can be purchased as accessory (part # 901267).
To change shelf position:
-
extract the rack out of the oven
- lift the rack to disengage the runners
- pull the rack out of the oven cavity
-
close the rack
- install the rack in another position while completely closed