Franke CUBE FFPD3350, Installation Manual

Page: 5 / 24

– 5 –
EN
6. Install the mounting hardware to the
mounting shank of the Faucet Base ( 1 )
underneath the mounting surface in
the following order: Rubber Washer ( 3 ),
Plastic Flange ( 4 ) and Fixing Plate ( 5 )
(fig. 2B).
7. Secure the faucet by tightening the
Fixing Nut ( 6 ) onto the mounting shank
of the Faucet Base ( 1 ) and tightening the
screws in Fixing Nut ( 6 ) (fig. 2B).
8. Connect the Check Valve Holder ( 7 )
to the Spray Supply Hose ( 8 ) (fig. 2C).
Then connect the Check Valve Holder ( 7 )
to the Spray Hose ( 13 ) (fig. 2D). Make
sure the O-ring ( 7a ) is in place in the
Check Valve Holder ( 7 ).
2D
2C
7
7
7a
13
8
8
9. Attach the Weight ( 9 ) to the Spray
Hose ( 13 ) approximately 2” above the
bend in the bottom of the Spray Hose
(fig. 2E).
2“
2E
13
9
10. Connect the Flexible Supply
Hoses ( 11 ) to the water supply in the
home (fig. 2F).
2F
11
11
11. Remove the Aerator ( 12 ) using the
Aerator Key ( 10 ) (fig. 2G).
2H
12 12
2G
10
12. Turn on water, flush the faucet and
Aerator ( 12 ) to remove any debris and
check for leaks (fig. 2H).
13. Reinstall the Aerator ( 12 ) and ensure
everything is functioning properlty.