of 16
7
Installation
7.
Raise the tower into place -
8.
Examine gasket for correct installation -
9.
Insert the (4) support bolts -
-
Choose the proper length bolts for installation,
either 3” or 6”
-
Ensure the bolt heads are seated in the recesses,
to prevent bolts from turning during tightening
10.
washer
lock washer
wing nut
Install support panel in place -
-
Tighten fasteners (wingnuts, lock washers and
washers) to secure tower in place
11.
Connect communications cable -
-
Connect communications cable in place and
secure
IMPORTANT: Ensure notches are aligned to
prevent pin damage
Summary of Contents for Bkon Craft Brewer
Page 1: ...INSTALLATION MANUAL...
