Franke Kindred Canada Limited
1000 Franke Kindred Road | Midland | Ontario | Canada | L4R 4K9
T 1-855-446-5663 | F 1-866-227-3050 | www.franke-commercial-com | [email protected]
2030040792 |
01/19
2
Franke Kindred Canada Limited
1000 Franke Kindred Road | Midland | Ontario | Canada | L4R 4K9
T 1-855-446-5663 | F 1-866-227-3050 | www.franke-commercial-com | [email protected]
2. Tap Menu
Run on time
– How long the faucet will run when your hands are moved away from the sensor.
Range
- The distance away from the sensor that will trigger operation.
Wave On-off
– Change the behavior of the tap so that a wave on will start the water
running.A second activation will turn off the water. This is primarily for remotely installed
sensors.
Anti-Vandal Time
- In the event of a blocked or vandalized sensor, this is the time that
the sink will run until automatically shutting off.
Automatic Purge
- Time between automatic run-times to help combat stagnant water in
the pipes.
Lock Outs
– System can be locked out from use after a pre-set number of operations.
3. Ozone Control Menu
The ozone control menu is for preventative maintenance and data logging for Medi-flo
and Ozo-flo.
Ozone Count
– the total time in hours the ozone generator has run.
Valve Time
– The number of activations that the solenoid valve has been triggered
Wash Data
– The system will keep track of average wash and rinse times which can be
accessed via USB cable. (see Data Logging step for details.
NOTE: Each parameter (ozone count, valve timer and wash data) can be reset individually
or all at once. To reset, point the programmer at the sensor, select the desired function to
reset and press OK. Reset accordingly, as items are replaced or maintained to track usage.
Firmware Updates
To update the firmware on your Hand held Programmer, follow the steps below:
1. Plug the programmer into your PC via USB and press OK to enter “mass storage mode”
2. Open programmer files on your PC and drag new software file into the first file’s folder.
3. EJECT, then unplug the programmer.
4. Turn the programmer on.
5. Scroll to System Menu, and scroll down to “Firmware Update”, then press OK.
6. Select new firmware version and press OK, then wait for screen to load.
7. Follow the on-screen instructions to complete.
2030040792 |
01/19
4
1
Navigation buttons (x4)
2
OK
3
On/Off
4
Receive
5
Send
6
Switch cover
7
Isolation switch
8
USB / charging port
9
Screen legend for tap menu only
T= No. of Operations
P= No. of Purges
R= Total Run Time (mins)
3
1
2
7
8
4
5
6
T=00000 P=0000
R=00000
9
Programmer layout & legend
The use of this crossed out wheeled bin logo indicates that this product needs
to be disposed of separately to any other household waste.
Legend
