Franke 1221B-10, User Instructions

Page: 8 / 36

INSTRUCTIONS FOR USE
GENERAL INFORMATION
The product features LED lighting (6.5 W),
aluminium filters and the EasyClean
system.
FUNCTIONS
A B C
Fig. 1
A. Lighting
B. Damper function. Open/close.
C. 1. Extension of timer (30 minutes).
2. Filter monitor. If the filter monitor is
activated (see Programming below), the
LED will flash when the filter needs to be
cleaned. After cleaning, press button C
for 2 seconds to reset the system.
The damper will close automatically after
60 minutes or if you press button B again.
It is a good idea to have the damper open a
short while before and after cooking to pre-
vent cooking smells spreading into the
room.
The product is fitted with a filter monitor.
To activate/deactivate the filter monitor,
see below.
Programming
1. Start programming: Depress buttons A
and B for 3 seconds so that they both
flash 3 times. Programming mode will
then be active for 30 seconds.
2. Select function: Press the button for the
selected function to activate/deactivate
the function.
Button Functions
C Filter monitor
The LED on the button lights up when
the function is activated.
3. To save a programme: Keep buttons A
and B depressed for 3 seconds. Buttons
A and B will flash twice to show that the
programme has been saved.
Attention!
If the product has a cooker alarm or coo-
ker guard, see separate instructions.
CARE AND MAINTENANCE
Cleaning the filter
The cooker hood should be cleaned with a
damp cloth and washing-up liquid. With nor-
mal usage, the filters must be cleaned at
least every other month. Clean more often
after intensive use.
Fig. 2
Remove the grease filters by opening the
snap retainerFig. 2.
Handle the filters carefully, taking care not
to bend them.
Soak the filter in a solution of warm water
and washing-up liquid. Filters can also be
washed in a dishwasher.
Refit the grease filters after cleaning, mak-
ing sure they snap firmly into place.
8
991.0605.652_00/D000000006293/180001/2020-04-30