G Max Operation and Maintenance Manual
7
1.7 Applications
The
G Max
air heater is a direct combustion gas appliance, specifically designed for heating premises
for
agricultural
and
livestock
use (poultry farms, greenhouses, etc.). The air is heated using the
thermal energy developed by the combustion of the gas and is then sent to the room to be heated
together with the products of combustion, thus making 100% of the thermal power produced available.
The environment must be suitably ventilated in order to ensure air renewal and emission control.
Do not use theheater in basements or below ground level, nor in rooms used for domestic purposes.
The appliance is equipped with all the safety devices required by regulations, ensuring safe operation
in all conditions.
-
Flame control device: it performs pre-ignition checks, controls the ignition sequence, checks the
presence of flame during operation and locks the machine out in case of anomalies.
-
Safety thermostat with manual reset: protects the appliance from overheating by switching off
the burner.
-
Air flow switch: it functions in case of an abnormal reduction of the air flow, causing the flame to
extinguish.
The materials and components used guarantee high reliability, corrosion resistance and durability even
in the most critical environments.
This machine should only be used for the purpose
for which it was designed:
"Gas-fired air heater for space heating
for agricultural and livestock use".
All other uses are considered improper and potentially dangerous
.
1.8 Versions
The
G Maxheater
is available in the following version:
4208000
G Max 70
70 kW
3000 m³/h 230V~ 50Hz
1.9 Identification data and machine plates
Each machine is identified by a CE plate on which the reference data are indelibly marked. For any communication
with the manufacturer or service, always quote these references (Fig. 1.9.1).
Fig.1.9.1
