4.
Set OFF time only
1)
Press
once. When “M” begins flashing, use
to select the desired day to turn off the heater.
2)
Press OK button twice to skip ON time setting and enter OFF time setting. Hour and minute digits
begin
flashing. Use
to select the desired time to turn off the heater.
3)
Press OK button. The OFF time is now set.
5.
Clear timer settings
1)
Press
once. When “M” begins flashing, use
to select the day you have set.
2)
Press OK button. The screen shows
and the hour and minute digits are flashing.
3)
Press
to delete the turn-on time and the screen now shows
.
4)
Press OK button. The screen shows
and the hour and minute digits are flashing.
5)
Press
to delete the turn-off time and the screen now shows
.
Open window warning
If the room temperature decreases by 10 degrees within 3 minutes, the appliance will assume there is an open window
nearby. In order to conserve energy, the heater will automatically switch from High Heat to Low Heat, or if the heater is
already at Low Heat, it will turn off completely.
When switching from High Heat to Low Heat, the appliance will beep 3 times and the digital display will flash “88” 3 times
before displaying the existing heating status.
When switching from Low Heat to Off, the appliance will beep 3 times and the digital display will flash “88” continuously.
To reset the heating function, see “operating remote control” section.
NOTICE
To improve operation,
aim
the remote control at the front of the fireplace.
DO NOT
press the buttons too quickly
. Give the unit time to respond to each command.
NOTICE
When the heater is first turned on, a slight odor may be present. This is normal and
should not occur again unless the heater is not used for a long period of time.
