6
INSERTING AND REMOVING THE BATTERY
- Open the battery compartment by turning it anti-clockwise until it is set to the small unlocking symbol�
- Insert the battery into the compartment, respecting the polarity indicated�
- Reposition the battery compartment cover and turn it clockwise until it is set to the small locking symbol�
• Powered by a LR6/AA 1.5v battery included
• Stainless steel blades
GENERAL DESCRIPTION
1� Eyebrow hair removal head
2� Push button
3� ON/OFF button
4� Battery compartment
5� 4 mm precision comb (eyebrow removal)
6� 7 mm precision comb (eyebrow removal)
7� Cap
8� Adjustable comb (precision head)
9� Precision head
10� Mini-razor head with foil
TO BEGIN
Always comb your beard or moustache with a fine comb before starting to trim�
ADVICE FOR ACHIEVING BEST RESULTS
Beard, moustache and sideburn hair must be dry�
Avoid applying lotions before using the trimmer�
Comb the hair in the direction of the hair growth�
CHANGING THE TRIMMING HEADS
This product is supplied with interchangeable heads� You can use the precision head for trimming beard or moustache
hair, contours and sideburns; the eyebrow head for trimming eyebrows using precision combs; the mini-razor head with
foil for trimming the beard�
Always check that the clipper is turned off before changing the clipper and shaver accessories�
• Press the push button and remove the cutting head.
• Attach the other head by positioning it on top of the device
TO THIN OUT AND TAPER YOUR BEARD/MOUSTACHE
- Attach the adjustable guide comb to the trimmer’s blade and select the desired length by sliding the adjustable guide
comb upwards or downwards�
If you are using the trimmer for the first time, start with the longest cutting length�
- Once you have set the adjustable guide comb to the desired length, switch the trimmer on�
- Place the guide comb’s flat top against the skin�
- Complete movements towards the edge of your beard/moustache to size it according to your preferences in the
different areas of your face and movements towards the outside of your beard at neck level�
TO TRIM YOUR NECK
Note: You will need a mirror to do this if you are alone�
- Remove the guide comb from the trimmer� Use your fingers to remove the hair from the neck�
Your index finger should cover the roots of the hair you want to remove to prevent any accidental cutting with the
trimmer�
- With your other hand, hold the trimmer at the base of your neck with the blades facing upwards and move the trimmer
up along the length of your neck until it comes into contact with your finger covering the roots of the hair at the base
of your head�
Make sure that you move the appliance slowly when doing this and hold the roots of the hair at the base of your head
away from the trimmer�
TRIMMING YOUR SIDEBURNS
Start with the edges of the sideburns and, with the blades of the trimmer pushed gently against your skin, more the
appliance towards the outer edges of the sideburns to size them according to your preferences in the different areas
of your face�
SHAPING THE EYEBROWS
Position the comb designed to even out the eyebrows (4 mm or 7 mm long)�
Gently move the trimmer in the opposite direction to the hairs without pressing too hard�
CARE
- Regular maintenance of the trimmer blades will keep it in optimal operating condition�
You are strongly recommended to clean the unit only with a soft-bristle brush like the one provided in the kit�
- Make sure the device is turned off�
• Do not use strong or corrosive cleaners on the device or blades.
• Do not apply pressure or hard objects to the blades.
• Do not immerse the device in water. That would damage it.
This symbol, shown on the product or its packaging indicates that this product complies with European directive
2012/19/EU and that it must not be discarded with household waste� It must be taken to a suitable collection point for the
recycling of electrical and electronic equipment� By making sure that this product is disposed of properly, you will help
to prevent any potentially-negative consequences for the environment and human health� Recycling helps to conserve
natural resources�
IMPORTANT: When replacing your used batteries, we ask you to follow current regulations regarding their disposal� Please
dispose of them appropriately to guarantee their safe and environmentally-friendly destruction�
1
7
5
6
2
8
9
10
3
4
