Framery Q UL, User Instructions

Page: 8 / 26

Fire safety end devices (alarms, sprinklers etc.) can also be installed inside the pods
(instructions available upon request). The need for end devices inside the pod is always
determined by the applicable local authorities.
1.7.3 Installation, maintenance and disassembly
WARNING!
To reduce the risk of burns, fire, electric shock, or injury to persons, obey
the following:
Use cut resistant safety gloves during the installation, maintenance or
disassembly of the product.
Use steel toed safety boots during the installation, maintenance or disassembly
of the product.
Use safety glasses during the installation, maintenance or disassembly of the
product.
Read and understand the instructions and plan your work beforehand.
Obey all local rules and regulations regarding workplace safety.
Keep the work site tidy and free from debris throughout the installation,
maintenance or disassembly process.
Do not climb on top of the product or place any load on the roof of the product.
Do not push the product to move it if not specifically instructed to do so in this
manual.
The product is very heavy and moving the product after installation requires a
significant amount of force. Moving a finished product without disassembly and
reassembly requires an on-site risk assessment to be performed by the party
responsible for moving the product.
1.7.4 Use
Maximum loads for the Framery Q table options:
• Turnable table: 131 lbs (60 kg)
• Oval table: 131 lbs (60 kg)
• Full width table: 360 lbs (168 kg)
8
Framery Q (UL) User instructions
info@frameryacoustics.com