28
WARNING
: Gas hose and electric connection of the appliance should not pass next to hot areas such as
back of the appliance. Gas hose should be connected by making wide angle turns against breaking
possibility. Movement of appliance whose gas connection is made may cause gas leakage.
For natural gas connection;
WARNING
: Natural gas connection should be done by authorized service.
For natural gas connection, place gasket in the nut at the edge of natural gas connection hose. To install the
hose on main gas pipe, turn the nut. Complete the connection by making gas leakage control.
Transformation from natural gas to LPG and from LPG to natural gas
1.
Turn off gas and electricity of the built-in hob. If your built-in hob is hot, wait for cooling down.
2.
For injector change, use a screwdriver whose edge is as the figure 1.
3.
As seen in figure 2, demount burner lid and burner of the built-in hob and ensure visibility of
injector.
4.
Remove injector by turning as shown in figure 3 with screwdriver and replace it with a new one.