FD
17
6.3 POWER SAVINGS
To reduce power consumption, take care of following suggestions :
Make sure that room in which unit should operate has doors and windows firmly closed;
Set the humidity control switch to the proper value: lower set values than necessary (even few points)
may cause great capacity loss with consequently longer operating periods: it is advisable to set humidity
values below 60% only if strictly necessary.
For the machine which has a second condenser (monoblock or split system) check every month if the
heat exchanger is clean and free from room dust, and check the efficiency of the motorfan.
CHAPTER 7: DISPOSAL OF THE UNIT AT END OF ITS LIFE
Once the unit is arrived at the end of its life and needs to be removed or replaced, the following operations are
recommended:
the unit refrigerant has to be recovered by trained people and sent to proper collecting centre;
compressor lubricating oil has to be recovered and sent to proper collecting centre;
the frame and various components, if no longer usable , have to be dismantled and subdivided according
to their nature; in particular, copper and aluminium, which are present in conspicuous quantity in the
unit.
These operations allow easy material recovery and recycling process, reducing environmental impact.
It is recommended to follow the pertinent norms in the disposal of the wasted materials.