Operation
Operating Manual EM-PQ 2300
33
8.1.13 Display, big display page, Total power page
Selecting the menu item
Total power
in
big display
opens this page. Pressing the
ESC
key will close the page
and return the user to the next higher menu level.
Here the following measured variables are shown in large characters:
P total
(Total active power)
Q total
(Total reactive power)
S total
(Total apparent power)
PF
(Power factor)
8.1.14 Display, big display page, TN-S measurement page
Selecting the menu item
TN-S measurement
in
big display
opens this page. Pressing the
ESC
key will close the
page and return the user to the next higher menu level.
Here the following measured variables are shown in large characters:
IN
IPE
Idiff
VPE
8.1.15 Display, Active alarms page
Selecting the menu item
Active alarms
in
Display
opens this page. Pressing the
ESC
key will close the page
and return the user to the next higher menu level.
The alarms currently present are displayed here.
8.1.16 Configuration, Configuration page
Selecting the menu item
Configuration
in the
Start menu
opens this page, where the most important settings for
the EM-PQ 2300 can be made.
8.1.17 Configuration, Changing the setting parameters / Password entry
To change a setting in the configuration window, proceed as follows:
Select the setting to be changed, then press the
OK
key.
Enter the password in the box. The default password is the last four digits of the
instrument serial number.
Use the
and
keys to select each digit, then change it with the
and
keys.
Confirm with the
OK
key.
If the password is correct, the user can change parameters for the next 5 minutes, or until the device
selection page is opened, without being prompted to enter the password again.
