Copyright ©FRABA
13
Baud Rate Setting
ENCODER CONFIGURATION
Press Alt + F8 to write multiple registers.
Filling in “Slave ID”, “Address”, “Quantity” and “Type”.
Set the corresponding register data.
Press “Send”.
Baud rate: 0=1200, 1=2400, 2=4800, 3=9600, 4=14400,
5=19200, 6=38400, 7=56000, 8=57600, 9=115200,
10=128000, 11=256000
Power off and reconnect at the new baud rate after setting.
According to the figure above, we can find:
Register Address of baud rate is 256.
Address should be filled in 256.
Quantity should be filled in .
