Specifications
- Bright OLED 0.96inch display
- High accuracy solid state sensors
- Operating temperature:
>> unit: 45deg celcius max.
>> Temperature probe: 120 deg celcius max.
- dimensions :
Main unit: 215 mm x 128 mm x 55 mm
Weight: 915g
-220VAC supply
-Max power per AC Socket on the device:
>> 10Amp Max or 2000W
>> Both sockets combined may not exceed 15Amp or 3000W
-
**
With the
High Power Module H1
accessory unit the heater controller power that can be controlled
can be increased to 3.5kW (or 16Amp)
How to take care of the unit:
-
It is recommended to place a “screen protector” over the screen. Any cheap phone screen
protector can be used. Cut to size and place over the screen to protect against dust and
resins spoiling the screen.
-
Keep dry
-
Keep out of direct sunlight
-
Only operate in an environment suitable for humans
-
Do not drop and avoid unnecessary vibrations
-
Switch the unit off after use
-
Take care to avoid the leakage of any resins into the pipe connected to the unit. Should resin
enter the units sensor chamber the pressure sensor will be destroyed. It is recommended to
always make use of a reservoir or chamber between the vacuum bag system and the
pressure controller and vacuum pump.
- - - - - - - -
Enjoy your unit and we trust your creations will be great.
Any comments or suggestions are welcome.
Email: [email protected]
_______________________________________________________________________
Summary of Contents for Auto VH1
Page 7: ......
