manualshive.com logo in svg

FPS Image AnyPlace IA-200, User Manual

Share
Download
FPS Image AnyPlace IA-200 User Manual Download Page 18

User’s Manual 0020D1.01 

 

Image AnyPlace IA-200 

communications and control layer that enables each IA-200 application to quickly identify that a 
specific IA-200 is attached and ready to communicate.  Basic details on how to quickly connect 
are provided in the Quick Start Guide.  In depth explanation is provided in the Router Manager 
Manual. 

2.3.3  IA-200 Control Tool  

IA-200 Control is intended as Control Program Emulator and Control Script Development tool.  
Use the IA-200 Control Tool to experiment with IA-200 Control Protocol, and develop scripts of 
ASCII based protocol (described in the IA-200 Programmer’s Guide).  These scripts can then be 
imported into popular Pro AV controllers such as Crestron and AMX for control of the IA-200 in 
a large installation.  The IA-200 Control Utility does not require a software key for operation.  
Installation with Router Manager is not required for IA-200 Control Tool. 

2.3.4  eWarp Designer 200 

eWarp Designer 200 is used to develop grid based Geometry Correction for the IA-200_EX and 
IA-200_BEX versions.  eWarp Designer 200 requires a serial number based Key for operation.  
The key is installed during manufacturing or may be installed in the field (key installation is 
accomplished with eWarp Designer 200 itself).  Correct installation with Router Manager is 
required for eWarp Designer 200operation. 

2.3.5  Edge Blending Utility 200 

Edge Blending Utility 200 is used to control Edge Blending in IA-200_BEX versions.  Edge 
Blending Utility 200 requires a serial number based Key for operation.  The key is installed 
during manufacturing or may be installed in the field (key installation is accomplished with Edge 
Blending Utility 200 itself).  Correct  installation with Router Manager is required for Edge 
Blending Utility 200 operation. 

2.3.6 Updater 

Update is used to provide firmware updates to all versions of IA-200.  Updater connects directly 
to the IA-200 in Service Mode.  Please see the Updater manual for details on Service Mode and 
the use of Updater.  Updater does not require Router Manager. 

 

Page 18 of 49 

 

© Flexible Picture Systems 

Summary of Contents for Image AnyPlace IA-200


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands