FPM Agromehanika 627 152 Assembly / Operation/ Maintenance, Spare Parts List Download Page 5

Page 5 

 

LIMITED WARRANTY 

 

For each original unit delivered to the user by the FPM Agromehanika AD Boljevac distribution network, 
the  manufacturer  issues  a  warranty  in  accordance  with  the  Standardization  Act  and  Machinery  Safety 
Regulation (Official Gazette of the Republic of Serbia No. 13/2010) guaranteeing that each rotary rake 
part is new and free from defects in materials and workmanship for the period of one year from the date 
of  delivery  of  the  machinery  to  the  end  user,  subject  to  the  condition  that  the  machinery  is  used  and 
maintained in accordance with the instructions given in this operation and maintenance MANUAL. 

 

EXCEPTIONS: 

 

1. 

 

Wooden parts are not covered by the warranty. 

2.

 

Parts not manufactured by FPM Agromehanika AD Boljevac (rubber and plastic components, 
belts, PTO shaft, PTO shaft guard, etc.) are not covered by this warranty, but by the respective 
manufacturer’s warranty. 

3.

 

Parts subject to normal wear and tear during use, such as: Spring tines used for raking, tires, 
swath board. 

4.

 

The warranty lapses in the event of misuse or abuse, improper or negligent use,  
or accidental damage. The warranty also expires in the event of using non-original parts, and the 
manufacturer may not be held liable for any transport damages. 

 

THE MANUFACTURER MAY NOT BE HELD LIABLE FOR ANY LOST PROFITS AS A RESULT OF A 
ROTARY RAKE DEFECT OR INJURIES TO THIRD PARTIES, NOR FOR ADDITIONAL COSTS 
INCURRED FOR REMOVING AND REPLACING PARTS. 

 

The buyer shall be liable and bear the costs for: 

 

1. 

Regular maintenance, such as lubrication, refilling oil, small adjustments, etc. 

 

2. 

Transport of the machinery to the service location and back within the warranty period.  

 

3. 

The travel time of the authorized service representative to the rake owner and back, or 

the transportation of the rake to and from the workshop following a repair. 

 

This warranty does not apply to a rotary rake that has been altered or modified without our 
express permission, or repaired by another person outside the authorized service. 

 

The warranty is subject to strict observance of the warnings: 

 Any warnings given in this manual must be observed and all components regularly inspected 

and replaced as required. 

 

A warranty for parts that are not new is excluded. 

 

Individuals working in our production plant are not its official representatives and are therefore not 
authorized to assume any obligations in its name or on its behalf. 

 

No warranty shall cover product equipment in excess of that specified, and the manufacturer may 
not be held liable for injuries resulting from such use. 

Summary of Contents for 627 152

























Reviews: