FPM Agromehanika 618 192, Installation/Handling/Maintenance

Page: 10 / 36

Page | 10
Never turn on the cardan shaft of the tractor when the mulcher is in the transport position
Never leave the driver's seat while the tractor is in operation mode.
Each time before using the mulcher, make sure that all the parts (nuts, screws, etc.) are adequately tightened;
particularly tighten the blades on the rotor.
If the blades on the rotor and the parts that are used to tighten them (bolts, screws, etc.) are worn or
damaged, replace them immediately with the original parts
manufactured by FPM AGROMEHANIKA AD
BOLJEVAC.
Before starting the adjustment, lubrication or cleaning of the mulcher, turn off the engine of the tractor,
remove the ignition key, turn off the cardan shaft and pull the parking brake of the tractor.
Wait for the rotary parts to stop moving before you approach the mulcher.
Never wear loose clothing that might be caught by the rotary parts of the mulcher. Clothing should fit to the
body.
Use protective clothing, goggles, gloves and shoes, particularly when working on rocky soil.
The operator must be absolutely certain that no person or animal is located in the area of working with the
mulcher, before he starts the mulcher and starts working. One should always think about the consequences of
irresponsible work, because they are irreparable.
Remove foreign objects from the field before you start working.
IMPORTANT: By the roads, footpaths, public areas (parks, schools, etc.) and on the rocky soil, work
with special care and secure the working conditions in order to avoid the risk of accidents
due to bouncing of objects to other objects and persons.
Never work with the machine when reversing.
It is absolutely forbidden to have the mulcher operated by an incompetent person, a person without a driver's
license or a person without adequate psycho-physical characteristics.
At the end of the season working with the mulcher, it is necessary that the authorized servicer inspect your
mulcher, bring it into proper condition, particularly the blades on the rotor, and to accurately tighten all the
parts (screws, nuts, etc.).
THESE WARNINGS MAY NEVER BE NEGLECTED
SAFETY
CONNECTING MULCHER TO TRACTOR
Before each connecting and disconnecting of the mulcher to and from the tractor, lock hydraulic controls to
prevent any unintentional lifting or lowering.
When connecting, pay attention to the category of the tractor and the connecting levers of the mulcher - they
must be adjusted.
Zone around the connection points is very dangerous. There is a risk of injury when connecting the
connecting levers.
When using external commands for hydraulics do not stand between the tractor and the mulcher.
Observe and block the lateral movement of the connecting levers of the tractor during transport.