Post Base Vision
Servicedocumentation
7
Remove letter transport X16 to encoder & 2
screws at the front (
possibly infeed plate
X44 &
1 screw)
Lift the print assembly (use the Stylus!) and
moove it to ~1cm ( 0,4”)before 1
st
position
sensor (LED)
img_3889_
if necessary, remove infeed plate with LED
board (= gate with sliding sheet metal)
img_3888_
8
Extension of the print unit:
Unplug X35 / flat cable
img_3891_
unclip the
strain relief and thread out th
eflat cable
img_3893_
img_3894_
Company confidential
!! Revision 19 / 01 / 24
Page
11
/ 27
