FP FPi 4700, Operator'S Manual

Page: 33 / 400

Finish the Job Definition and Start the Job
When you have finished the exit settings, the touch screen shows an overview of the job
settings.
In this screen you can change the following settings:
• Move documents between feeders (see Change to an other feeder tray )
• Link feeders (see Link feeder trays )
• Change the counter settings (see Change the counter settings )
When you are ready with these settings, proceed as follows:
Load the documents on page 45 as indicated on the Job info screen. 1.
2. Tap [ 1x ] to create a test mail set (see Test mail set ).
3. If desired, you can save the job (see Save a job ).
4. Tap [ Start ] to start the job.
Create a Test Mail Set
Before starting an existing job or a new, manual created job, it is possible to create a test
mail set.
This test run is intended to validate the settings of the Inserting System:
• Check if the address is correctly positioned behind the envelope window.
See Adjusting the Address position .
• Inspect and adjust the stop position of the envelope. See Adjusting the Envelope
Insert fingers .
• Check the fold settings for one set. See Fold settings .
28
| Page 28 | Aug-03-2016 04:03 | Working with Jobs
3
English