FP 50.0070.0001.00, Configuration Manual

Page: 65 / 98

Expansion modules
65
Example 2:
S0 plug-in module with 3 channels in socket 5 has module address
0x 3C
(Bus 6 ).
Channel 1 = Synchronous channel for channel 2
Channel 3 = absolute counting
No scaling used. Syncronisation every 15 minutes (900 s; only applies to channel 3
because channel 2 is synchronised by channel 1), start value for channel 3 = 1400.
[<SetConfig _="PROCCFG" ver="y">
<Periphery>
<Module Name="S0 (PIC)" Address=" C 6 3C ">
<Mode _=" sync1,abs "/>
<SyncPeriod _=" 900 "/>
<Numerator1 _=" 1 "/>
<Denominator1 _=" 1 "/>
<Numerator2 _=" 1 "/>
<Denominator2 _=" 1 "/>
<Numerator3 _=" 1 "/>
<Denominator3 _=" 1 "/>
<StartValue3 _=" 1400 "/>
</Module>
</Periphery>
</SetConfig>]
Values in the process branch for the first cycle after 100 pulses on channel 2 and 3.
For simplification, it should be assumed that the synchronous pulse for channel 1 oc-
curs simultaneously with the internal synchronous event after 900 seconds.
<C63C>
<Counter>
<P0 _="0" />
<P1 _="100" />
<P2 _="1500" />
<P3 _="0" />
<P4 _="100" />
<P5 _="100" />
<P6 _="900" />
<P7 _="0" />
(1 if read within 1 second after synchronisation)
<P8 _="3" />
Counter>
<C63C>