Configuration manual FP S-ENGuard
56
Configuration via process variables
[<SetConfig _="PROCCFG" ver="y">
<ProcessVars>
<!-- the variable pressure outputs the converted value in mbar -->
<Pressure type="float" format="F.1" >
<Value>
<!-- Channel 1 of the onboard module -->
<LD _="/Process/
C094/AI_PPSSAAA/P0
" />
<!-- Restore value to float stack -->
<I2F/>
<!-- Subtract initial value -->
<SUBF _="
400
"/>
<!-- enter the calculated
factor
here ! -->
<P2 _="
3.75
" />
</Value>
</Pressure>
<!-- if Pressure_Err changes to 1, then there is an error -->
<Pressure_Err>
<Value>
<LT v1="/Process/C094/AI_PPSSAAA/P0" v2="400" />
</Value>
</Pressure_Err>
</ProcessVars>
</SetConfig>]
Summary of Contents for 50.0070.0001.00
