Page 2
HCF/HCC
© 2022 FP Mailing Solutions
Step 5 -
Located in the HCF accessories box is the feeder height guide. These decals are
to be applied to the metal of the Printers under the MP tray 2 inches from the operator
and none operator side. The bottom of the sticker will line up with the bottom of the
metal plate.
Step 8 -
Adjust the Leveling casters on the HCF until the arrows on the feeders depth
standoffs are in the green zone of the feeder height guide decals.
Step 6 -
Remove MP Tray Extension by flexing the side of the tray.
Step 7 -
Remove the Exit Tray Extension by removing the 2 screw circled in red below,
along with the plastic E clip located on the non operators side of the tray, circled in yellow
