Operating with WiFi stick (optional)
39
6.3 Using FP S-Compact as WiFi client
With a WiFi stick in mini format (available from FP InovoLabs GmbH under order
number: 90.0072.8100.00) the FP S-Compact can also be used as a WiFi client. In this
mode, the device connects to a WiFi router and can thus be wirelessly integrated into
a network.
The ‘WiFi client’ mode must be configured. On delivery and after a factory reset,
‘Access Point’ mode is active (see chapter 6.1).
For the FP S-Compact to work as a WiFi client, the
ISP/WiFi
database must be
configured before inserting the WiFi stick.
Configuring the ISP/WiFi database
Example
[<SetConfig _="ISP" ver="y">
<WLAN>
<Profile_0 SSID="acer">
<Authentication _="WPA_TKIP"/>
<Password _="87654321"/>
<Ethernet>
<IP _="DHCP"/>
<HostName _="myDeviceName"/>
</Ethernet>
</Profile_0>
</WLAN>
</SetConfig>]
SSID
Name of the access point to which the device should connect
(only ASCII characters allowed).
Authentication
Specifies the encryption method. Currently only WPA_TKIP is
supported.
Password
WiFi password of the router
(only ASCII characters, no special characters).
IP
IP configuration.
Currently only the DHCP mode is supported (automatic assign-
ment of IP address, gateway and DNS by the router).
Hostname
Host name by which the device can be reached on the network
(if supported by the router).
Summary of Contents for FP S-Compact BB
