56
Windows Diagnostic Platform GT90 Max User's Manual V1.01
8.2 Bluetooth
During the Bluetooth pairing process, make sure the VCI dongle is correctly
powered by either connected to a vehicle or connect to the tablet with the
USB Type-B cable.
To make Bluetooth pairing of the VCI dongle and the tablet
1. Connect the VCI dongle with a vehicle via diagnostic cable or connect to
the tablet with the USB Type-B cable.
2. Click the
VCI Manager
application on the GT90 Max Menu.
3. Select
Bluetooth
option from the list.
4. Select the right device with the GT90 Max serial number from the list.
5. When paring is successfully done, the status is shown as Paired.
6. Wait a few seconds, and the
button at the toolbar illuminates green,
indicating the tablet is connected to the VCI dongle via Bluetooth.
NOTE
A VCI dongle can be paired with ONE tablet each time.
8.3 Unbind a VCI dongle
This option allows you to unbind a VCI dongle when the VCI dongle is
defective or stolen.
To unbind a VCI dongle:
1. Click the
VCI Manager
application on the GT90 Max Menu.
Figure 8-3 Sample VCI Manager Screen
2. Select
Unbind a VCI dongle
option from the option list and press
OK
to
confirm.
