12
BT780 Battery Analyzer User’s Guide - English Version_V3.00
9. View test results on the screen. Depending on battery status, one of the following test results
may display.
No.
Test Results
Interpretation
1
GOOD BATTERY
The battery is in good condition.
2
GOOD-RECHARGE
The battery is in good condition but low current. Fully charge
the battery.
3
CHARGE &
RETEST
Fully charge the battery and retest. Failure to fully charge the
battery before testing may result in inaccurate results. If you
still get CHARGE & RETEST message after you fully charge
the battery, replace it.
4
REPLACE
BATTERY
The battery is almost dead or the connection between the
battery and the battery cable is poor. Replace the battery
and retest; or disconnect the battery cables and retest the
battery with the out-of-vehicle test mode before replacing it.
5
BAD CELL-
REPLACE
The battery may be damaged such as broken cell or short
circuit. Replace the battery and retest.
10.Use
UP
or
DOWN
button to check the second page of battery test result which include state
of health (
SOH)
, state of charge (
SOC),
and resistance (
RES).
11.Press the
BACK
button to return to Main Menu. Or, press the ENTER button for cranking test
if you are processing an in-vehicle test.
NOTE
The tester keeps the results of last test only. When you start a new test, the last results
are overwritten.
