BT715 Battery Analyzer User’s Guide - English Version_V1.00
17
5
NO START
No vehicle start detected.
6
CRANKING
SKIPPED
A start was not detected.
NOTE
For an in-vehicle test, the display alternates between the test results and the message. Press
ENTER
for charging test.
3.4 Charging System test
Once you have completed an in-vehicle test, the display alternates between the battery test
results and the message press
ENTER
for charging test. Press
ENTER
to proceed with the
charging test.
To start charging system test:
1.
Follow the on-screen prompts to Rev the engine.
2.
Turn on high beams headlights and the blower fan.
3.
Rev engine with loads on.
4.
Idle engine and turn off loads.
5.
The Charging System decision is displayed at the end of the procedure.
No.
Test Results
Interpretation
1
NO PROBLEMS
System is showing normal output from the alternator.
2
NO OUTPUT
No alternator output detected.
Check all connections to and from the alternator,
especially the connection to the battery. If the
