BT715 Battery Analyzer User’s Guide - English Version_V1.00
16
NOTE
The tester keeps the results of last test only. When you start a new test, the last results are
overwritten.
3.3Cranking Test
NOTE
Before starting the test, inspect the alternator drive belt. A belt that is glazed or worn, or lacks the
proper tension, will prevent the engine from achieving the rpm levels needed for the test.
After an in-car battery test, the display alternates between the battery test results and the
message PRESS FOR CRANKING TEST.
To start cranking test:
1.
Press the
ENTER
button for cranking test.
2.
Start the engine when prompted.
3.
The tester displays the decision on the starter system, cranking voltage, and cranking time in
milliseconds.
No.
Test Results
Interpretation
1
CRANKING
NORMAL
The starter voltage is normal and the battery is fully
charged.
2
LOW
VOLTAGE
The starter voltage is low and the battery is fully charged.
3
CHARGE
BATTERY
The starter voltage is low and the battery is discharged.
Fully charge the battery and repeat the starter system
test.
4
REPLACE BAT
Battery must be replaced before the starting system can
be tested.
