Other Malfunctions
The receiver keeps outputting a “Searching…” message, and the NETWORK
LED is constantly blinks:
It should take up to one minute to establish a wireless
link. If the link was not established within that time period, verify the transmitter is
powered on and not connected to another receiver.
The receiver is outputting “Connected to source name, Please Check Video
Source”:
Check the HDMI connection between the transmitter and the video source.
The receiver displayed a connection failure message and outputs a “Wireless
Off” message:
If there is more than one registered transmitter, and the receiver
failed to connect to it within a minute or two, the receiver will go into standby mode
and shut down the RF. In order to connect to the desired source, press on the
“SOURCE” button and choose the desired source.
The NETWORK LED blinks rapidly and there is no display on the monitor:
Power cycle the unit. If the issue remains, the device might be faulty. Please contact
our’s support team.
Link cannot be established or poor video/Audio quality:
Try to decrease the
range between the transmitter and the receiver or remove obstacles out of the way
between the transmitter and receiver.
