OPERATING INSTRUCTIONS
STU 720if
2
ABOUT THIS MANUAL
This manual is a guide on how to use the UEC STU (Set Top Unit)
720 satellite receiver/decoder supplied by FOXTEL.
The Digital Satellite STU Equipment
This section provides an overview of the FOXTEL Set Top Unit
(STU) Equipment. It contains diagrams and tables of the STU and
Remote Control Unit.
Getting Started
This section explains the basic operation of the STU, from
switching it on to tuning your TV to receive the satellite
programmes.
STU Connections
This section deals with the various domestic installation
configurations available and illustrates optional connections for
your TV, VCR and Hi-Fi.
Controlling the Show
This section shows you how to use the various controls to
provide you with the optimum viewing and listening experience.
Using the On-screen Menus
The menu system enables you to set functions in the STU so that
you can customise its features to suit your viewing needs.
Troubleshooting
This section contains a troubleshooting guide and explains how
FOXTEL can provide you with technical assistance.
SAFETY
This STU exceeds International Safety Standards but you must
exercise care when using it. Please read the following
recommended safety precautions carefully, and exercise care at
all times when connecting or disconnecting any of FOXTEL’S
equipment from a power source.
MAINS SUPPLY
: 192-288 V (220/240 V) AC 50 Hz.
LIQUIDS
: Keep liquids away from the STU.
CLEANING:
Before cleaning, disconnect the STU from the wall
socket. Use a cloth lightly dampened with water (no solvents) to
clean the exterior.
VENTILATION:
Do not block the STU ventilation holes. Ensure that
free airflow is maintained around the STU. NEVER stand the STU
on soft furnishings or carpets. Do not use or store the STU
where it is exposed to direct sunlight, or near a heater. Never
stack other electronic equipment on top of the STU.
ATTACHMENTS
: Do not use any attachment that is not
recommended by the manufacturer, as it may cause a hazard or
damage the equipment.
CONNECTION TO THE SATELLITE DISH LOW NOISE BLOCK
(LNB)
: The LNB connector cable has a voltage on its centre core.
It is therefore recommended that the STU is disconnected from the
mains power before connecting or disconnecting this cable.
FAILURE TO DO SO COULD DAMAGE THE LNB AND/OR GIVE A
MILD SHOCK
.
SERVICING:
Do not attempt to service this product yourself. Any
attempt to do so will be against your terms and agreements.
Refer all servicing needs to FOXTEL 131 999.
