T3500 Plus Tethered Power System for Drones
Operation Caution
©
2019 FOXTECH All Rights Reserved
3
The first step (preparation):
Open the ground station cover, connect the 220vac input cable, then connect with the 220vac power supply
(main supply or generator power
≥
5KW, if using a generator, please start the generator and wait for 3~5
minutes) the operation panel is as follows:
1. LED Display: Mainly display company information, product model, current, voltage, power, temperature,
winch pull, lead-out cable length and alarm code；
2. Winch Control Knob: 0~9th gear,Max. suggested gear is 6.5 while using, adjust to about 4th gear if the
drone is hovering in the air, otherwise the cable will pull the drone.
3. Cable Power knob: Long press 3s to power on,long press 3s again to power off,press 1s to enter the
sub-menu setting, input voltage and alarm power;
4. System Switch: ON- power on the whole equipment；OFF- power off the whole system；Long press the
middle button 3S to reset the system;
5. Cable observation window: Used to observe the status of lead-out cable;Please open the cable
observation window if the environment temperature is above 25 ；,lower the internal temperature of the
equipment. ；
6. Cable Outlet: Inside the brush there is a reciprocating screw rod, put the cable connector inside the brush
to reduce the dust and other debris；
7. Warning Light: When a system error occurs or a precautionary warning was set；LED will flash with the
buzzing sound,press the cable power switch to relieve alarm;
8. FC Interface: Connect with external ground station or required display equipment.
9. 220vac input: Using the power input cable provided by our company, power on the equipment.
Cable Assembly: Input 400~500vdc high voltage to the onboard power module ,the allowable current is
5~10A
Onboard Power: Convert high voltage into 48vdc for the motor.
LED Display
Warning Light
Fibre-optical
Output Interface
Winch Control Knob
Cable Power Knob
System Switch
Air Outlet
Air Inlet
Air Switch,turn off during
transportation
Onboard Power
220vac Input
Cable Observation
Window
Cable Outlet
Lock Catch
