VDC-30 Long Range Video/Data/RC Wireless Transmission System
User Manual
©
2020 FOXTECH All Rights Reserved
23
FAQ
1 The power indicator light is not on after powering up
- Check the wiring order of the power cable.
- Check the DC power range.
2 Link indicator light is not on after powering up.
- Check that the RF cable is connected properly.
- Check that the BW shortcut keys of the air and ground are in the same position.
- Check the antenna is OK.
3 The link indicator light is OK. But no data output.
- Check the UART cable wiring order.
- Check the UART baud rate.
- Please contact our company's after-sales service.
4 The ground unit can't output RTSP video streaming.
- Check the cable connection and wireless link is OK.
- Check the IP address of computer is right.
- Check the RTSP server address is correct.
- Please contact our company's after-sales service.
Note
×
For more information, please check out our official video tutorial. Foreign users please check
You Tube .
