FOXTECH Map-02 Mapping Camera
User Manual
©
2018 FOXTECH All Rights Reserved
8
Press the lens release button all the way in and turn the lens counterclockwise until it stops.
• If dust or debris gets inside the camera while you are changing the lens and adheres to the
surface of the image sensor (the part that converts the light source to a digital signal), it may appear
as dark spots on the image, depending on the shooting environment. The camera vibrates slightly
when it is turned off, due to the anti-dust function, to prevent dust from adhering to the image
sensor.
However, attach or remove the lens quickly somewhere away from dusty locations.
• If foreign material attaches to the image sensor, dust it off using a blower.
• Do not leave the camera with the lens removed.
• When you want to use body caps or rear lens caps, please purchase ALC-B1EM (Body cap) or
ALC-R1EM (Rear lens cap) (sold separately).
Removing the Lens
Lens Release Button
