Foxtech EH640 30x Optical Zoom IR Thermal Camera
User Manual
©
2020 FOXTECH All Rights Reserved
14
Frequently Asked Questions
No Image
Hardware checking:
pod power supply is normal, pod and idu module are properly connected. The pod works properly.
Datalink (sky end, ground end) power supply is normal. The datalink sky end is properly connected to the
IDU module, and the connection wire is not broken. The datalink ground end and the computer is connected
normally, the network wire does not have the damage to break the circuit.
Software setup check:
Make sure the computer network is set correctly and the computer turns off the wifi when connecting the
datalink. The computer is not connected to any network other than the data link.
Software network IP address is incorrect :(when the gimbal, camera IP address changes, need to
synchronously modify this software IP)
Open GCS software
→
network settings
Modify the IP address.
This content is subject to change.
Download the latest version from
https://www.foxtechfpv.com/foxtech-eh640-30x-optical-zoom-ir-thermal-camera-with-3-axis-gimbal.html
For everyday updates, please follow Foxtech facebook page"
".
