Photo interval: 13.37s
The above parameters are for reference only.
Emergency treatment of fault problems
The following contents are used to guide the maintenance operators to deal with
simple maintenance problems.
Common
problem
Methods of resolution
Unable to power
on
Please check whether the power supply voltage is up to
standard. The minimum normal working voltage is 12.6V.
The number of
images is not
consistent with
the planning
images of the
ground station
When the ground station system calculates the expected
number of photos taken by the route
It is calculated according to the ideal state of uniform speed.
However, due to the speed change and distance error in the
actual flight process of UAV, there will be a certain gap, which
is a normal phenomenon. Please match the number of
images with the number of POS, and delete the start-up
self-test photos and other non active triggered photos.
There is a
difference in the
number of
photos between
shots
Under normal circumstances, the number of photos
taken by the five lenses should be the same. If there is any
inconsistency, it may be caused by the following reasons: 1.
After the power supply is turned on quickly and frequently,
the camera can not correctly identify the memory card and
cannot record the data, trigger the camera to take photos,
Summary of Contents for Argus V3
Page 1: ...Argus V3 user manual ...
Page 4: ...Meet Argus V3 ...